Newsletter sign up
-
- WebStore |
You need to upgrade your Flash Player Download the new version here. 
Brent Extruders |
 |
Amaco® offers two manual extruders - one table/slab roller model and a wall-mount model plus several die sets for creating dozens of clay shapes. |
| Brent Extruders |
| Brent Clay Extruder | Brent Clay Extruder HD |
 |
 |
| Read More | Read More |
| Holds up to 10 lbs. | Holds up to 10 lbs. |
| 4" barrel | 4" barrel |
| 3-Piece Die Set | 3-Piece Die Set |
| Brent Extruder Accessories |
| Standard Die Set | Hollow Die Set | 3-Piece
Die Set with selector |
 |
 |
 |
| Buy Now | Buy Now | Buy Now |
| Code: RBSTDIE | Code: RBHOLLO | Code: RB3DIE |
| (metal) | (metal) | (plastic) |
|
Steel End Cap for Barrel |
Blank
Die (plastic) |
| Code: RBSTEND | Code: RBBLANK |
| Buy Now | Buy Now |
| Brent Slab Roller Mounting Stands | |||
 |
Save space in your classroom or studio by mounting your Brent Clay Extruder to the end of any Brent SR Model Slab Roller. | Mounting Stand for SR-14 Slab Roller | |
| Code: RBMS14 Buy Now |
|||
| Mounting Stand for SR-20 Slab Roller | |||
| Code: RBMS20 Buy Now |
|||
| Mounting Stand for SR-36 Slab Roller | |||
| Code: RBSR36 Buy Now |
|||
| Brent Clay Extruder |
 |
It's easy to make thousands of different solid or hollow shapes with this clay extruder. The barrel is 4" in diameter and holds 10 pounds of clay. An easy-to-remove end cap holds the die you choose. Pull the handle and use the the extrusion for twists and braids, moldings, handles, cups, or coils. The clay extruder is constructed from heavy-duty steel pipe and all wear and stress points are case hardened. It comes with all the hardware needed to be bolted to a wall or bench and 3-piece die set with selector. the optional stands allow the clay extruder to be mounted to the end of the SR-14, SR-20, an dSR-36 slab rollers. Can also be used with standard and hollow die sets. One year warranty. To purchase dies or any other accessories click here. | |
| Buy Now | ||
| Code: RBHANDX |
| Brent Clay Extruder HD |
 |
Solid welded steel, wall-mount clay extruder features and exclusive Brent safety design. Two sets of clutch plates lock the clutch body assembly firmly in place at any height setting for maximum leverage. Pull up on the top plates to raise the handle and plunger or pull down ton the bottom plates to lower them. this design also assures equal pressure with any amount of clay in the barrel. this extruder comes with three mounting brackets and hardware and 3-peice die set with selector. The 4" diameter steel barrel holds up to 10 lbs. of clay and an easy-to-use end cap holds the die you choose. Can also be sued with standard and hollow die sets. To purchase dies or any other accessories click here. | |
| Buy Now | ||
| Code: RBCEHD |
facebook